03.05.2020, 08:19
Hab die Lösung im Post 45 in diesem Thread entdeckt.
Option 2: re-purpose your DSC Disable button to be the Sport button (I've never found the need to disable DSC). To do this, you have to move one wire in connector X14272 which is plugged into the bottom of the JBE. You'll need to remove the trim panel to get access to this connector. Info on the location and pin-out of the connector can be found in post #5 and #6 of this thread: http://www.northamericanmotoring.com...utton-mod.html. Once you've unplugged the connector you need to move the yellow wire and pin from terminal 14 to terminal 19. It is finicky to do (you need a small screwdriver to release the pin), but it is possible. Once you've moved the wire, pushing the button should no longer disable DSC (but it also won't activate Sport mode until we've coded it).
Da gibt es auch noch mal Grafiken wo sich der Stecker befindet und wie er belegt ist.
Mit diesem Wissen muss wirklich nur die Verkleidung im Bereich ausgeclipst, der Stecker abgezogen werden und die gelbe Ader von 14 auf 19 umgepinnt werden.
Das DSC läuft ganz normal, lässt sich nur nicht abschalten.
Ich werd auch nochmal schauen, ob ich nicht lieber den SSA- Knopf nehmen kann. Der hat bei mir eh keine Funktion.
Zur Codierung steht hier ja alles im Thread, wenn man die benötigten Kabel und Software hat auch ein Kinderspiel.
Option 2: re-purpose your DSC Disable button to be the Sport button (I've never found the need to disable DSC). To do this, you have to move one wire in connector X14272 which is plugged into the bottom of the JBE. You'll need to remove the trim panel to get access to this connector. Info on the location and pin-out of the connector can be found in post #5 and #6 of this thread: http://www.northamericanmotoring.com...utton-mod.html. Once you've unplugged the connector you need to move the yellow wire and pin from terminal 14 to terminal 19. It is finicky to do (you need a small screwdriver to release the pin), but it is possible. Once you've moved the wire, pushing the button should no longer disable DSC (but it also won't activate Sport mode until we've coded it).
Da gibt es auch noch mal Grafiken wo sich der Stecker befindet und wie er belegt ist.
Mit diesem Wissen muss wirklich nur die Verkleidung im Bereich ausgeclipst, der Stecker abgezogen werden und die gelbe Ader von 14 auf 19 umgepinnt werden.
Das DSC läuft ganz normal, lässt sich nur nicht abschalten.
Ich werd auch nochmal schauen, ob ich nicht lieber den SSA- Knopf nehmen kann. Der hat bei mir eh keine Funktion.
Zur Codierung steht hier ja alles im Thread, wenn man die benötigten Kabel und Software hat auch ein Kinderspiel.